Full Two-Roll Copper Rod Continuous Casting & Rolling Production Line.

• Customization: Available
• Production Scope: Product Line
• Automation: Automatic
• Transmission Type: Flexible
• Certification: CE, ISO
• Flexible Production: Lean Production
• Automatic Production Line: Comprehensive
• Copper Rob Dia: 8mm
• Capacity: 16t/H
• Weight: About 250t
• Casting Cross - Sectional Area: About 380mm
• Transport Package: Pallet
• Specification: Full two-roll
• Trademark: Joohonor
• Origin: Deyang, China
• HS Code: 84552130

Product Description

1. The purpose and composition of the unit
This production line is used to produce high-quality low-oxygen copper rods for electrical applications with a diameter of 8mm. The production line is composed of vertical melting furnace, holding furnace, continuous casting machine, auxiliary machine, continuous rolling mill, cooling reduction take-up device, emulsion lubrication system, gear oil lubrication system, process cooling water system, electronic control system, etc.

2.production process
Furnace feeding→ melting→ upper flow groove→ slag scraping tank→ holding furnace → lower flow groove→ continuous casting (billet) → forward drawing→ billet treatment (roll shear, unloading device, straightening, cornering, hairing)→ pinch rollers→ 4 rough rolling→ 8 finishing rolling→ copper rod cooling, surface reduction→ wax coating→ continuous rod winding→ concentric circle take-up → finished products.

3.Raw material requirements
Cathode plate (electrolytic copper).

4.Main technical parameters

SQ	Technical Specification	Parameter
1	Casting cross-sectional area	~3800mm²
2	Finished copper rod dia	Φ8mm
3	capacity	~16t/h
4	Loop weight	3t~5t
5	Equipment size	100 meters (length), × 18 meters (width), × 13m casting and rolling workshop/17.5m melting span
6	Main equipment weight	~250t
7	Installed capacity	1600KVA
8	Maximum final rolling speed	~ 10 m/s
9	Compressed air volume	10 m³/min      pressure0.5~0.7Mpa
10	Cooling water (soft water)	400 m³/h
11	Emulsion volume	100 m³/h
12	Lubricating oil volume	18 m³/h      pressure0.1~0.3 Mpa
13	Reduction coolant volume	100 m³/h     pressure0.3~0.5 Mpa