1. Introduction
Radiator Recycling Machine will be used for disassembling the waste radiator which are difficult to disassemble manually or the manual disassemble cost is too much high. After the professional processing, it can obtain renewable resources. The whole process is carried out in the negative pressure. The operator should charge the materials and select the large pieces of iron or large diameter screws, shaft material and other hard materials out, then enter the 1st stage roughing crusher and 2nd stage fine crusher in order to make the copper, iron, aluminum fallen off, finally adopt the strong magnetic roller and air separator to separate the Al, Cu. Fe. In the process of crush and sorting, a pulse dust removal system is equipped to solve the problem of dust discharge effectively.
| JX-2000A Radiator Recycling Machine |
| Modle |
JX-2000 |
| Technical Parameters |
|
| Overall Dimension(L*W*H) |
17500*9000*4500(MM) |
| Output |
1500-2000kg/h |
| Total Power |
137kw |
| Weight |
17800kg |
| Sorting rate |
>=98% |
| Inlet size |
≤800mm |
Audited Supplier 
){kind=link}